ninja: Entering directory `out/gn' [1/3] STAMP obj/llvm/test/test.stamp [1/3] ACTION //llvm/test:check-llvm(//llvm/utils/gn/build/toolchain:win) llvm-lit.py: C:\src\llvm-project\llvm\utils\lit\lit\llvm\config.py:57: note: using lit tools: C:\src\depot_tools\win_tools-2_7_6_bin2\git\usr\bin llvm-lit.py: C:\src\llvm-project\llvm\utils\lit\lit\llvm\config.py:502: note: using ld.lld: c:\src\llvm-project\out\gn\bin\ld.lld.exe llvm-lit.py: C:\src\llvm-project\llvm\utils\lit\lit\llvm\config.py:502: note: using lld-link: c:\src\llvm-project\out\gn\bin\lld-link.exe llvm-lit.py: C:\src\llvm-project\llvm\utils\lit\lit\llvm\config.py:502: note: using ld64.lld: c:\src\llvm-project\out\gn\bin\ld64.lld.exe llvm-lit.py: C:\src\llvm-project\llvm\utils\lit\lit\llvm\config.py:502: note: using wasm-ld: c:\src\llvm-project\out\gn\bin\wasm-ld.exe -- Testing: 52985 tests, 48 workers -- Testing: FAIL: LLVM :: tools/llvm-reduce/remove-dp-values.ll (19 of 52985) ******************** TEST 'LLVM :: tools/llvm-reduce/remove-dp-values.ll' FAILED ******************** Exit Code: 1 Command Output (stdout): -- # RUN: at line 1 llvm-reduce --abort-on-invalid-reduction --test c:\src\llvm-project\out\gn\bin\filecheck.exe --test-arg --check-prefixes=CHECK-INTERESTINGNESS --test-arg C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll --test-arg --input-file C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll -o C:\src\llvm-project\out\gn\obj\llvm\test\tools\llvm-reduce\Output\remove-dp-values.ll.tmp --try-experimental-debuginfo-iterators # executed command: llvm-reduce --abort-on-invalid-reduction --test 'c:\src\llvm-project\out\gn\bin\filecheck.exe' --test-arg --check-prefixes=CHECK-INTERESTINGNESS --test-arg 'C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll' --test-arg --input-file 'C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll' -o 'C:\src\llvm-project\out\gn\obj\llvm\test\tools\llvm-reduce\Output\remove-dp-values.ll.tmp' --try-experimental-debuginfo-iterators # .---command stderr------------ # | *** Stripping Debug Info... # | C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll:8:26: error: CHECK-INTERESTINGNESS: expected string not found in input # | ; CHECK-INTERESTINGNESS: call void @llvm.dbg.value(metadata i32 %added, # | ^ # | C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-47a094.ll:1:1: note: scanning from here # | ; ModuleID = 'C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll' # | ^ # | C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-47a094.ll:5:3: note: possible intended match here # | declare void @llvm.dbg.value(metadata, metadata, metadata) #0 # | ^ # | # | Input file: C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-47a094.ll # | Check file: C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll # | # | -dump-input=help explains the following input dump. # | # | Input was: # | <<<<<< # | 1: ; ModuleID = 'C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll' # | check:8'0 X~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ error: no match found # | 2: source_filename = "C:\\src\\llvm-project\\llvm\\test\\tools\\llvm-reduce\\remove-dp-values.ll" # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 3: # | check:8'0 ~ # | 4: ; Function Attrs: nocallback nofree nosync nounwind speculatable willreturn memory(none) # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 5: declare void @llvm.dbg.value(metadata, metadata, metadata) #0 # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | check:8'1 ? possible intended match # | 6: # | check:8'0 ~ # | 7: define i32 @main() { # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~ # | 8: entry: # | check:8'0 ~~~~~~~ # | 9: %uninteresting1 = alloca i32, align 4 # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 10: %interesting = alloca i32, align 4 # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | . # | . # | . # | >>>>>> # | ---------------------------- # | *** Reducing Functions... # | C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll:8:26: error: CHECK-INTERESTINGNESS: expected string not found in input # | ; CHECK-INTERESTINGNESS: call void @llvm.dbg.value(metadata i32 %added, # | ^ # | C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-3b57d2.ll:1:1: note: scanning from here # | ; ModuleID = 'C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll' # | ^ # | C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-3b57d2.ll:5:3: note: possible intended match here # | declare void @llvm.dbg.value(metadata, metadata, metadata) #0 # | ^ # | # | Input file: C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-3b57d2.ll # | Check file: C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll # | # | -dump-input=help explains the following input dump. # | # | Input was: # | <<<<<< # | 1: ; ModuleID = 'C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll' # | check:8'0 X~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ error: no match found # | 2: source_filename = "C:\\src\\llvm-project\\llvm\\test\\tools\\llvm-reduce\\remove-dp-values.ll" # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 3: # | check:8'0 ~ # | 4: ; Function Attrs: nocallback nofree nosync nounwind speculatable willreturn memory(none) # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 5: declare void @llvm.dbg.value(metadata, metadata, metadata) #0 # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | check:8'1 ? possible intended match # | 6: # | check:8'0 ~ # | 7: attributes #0 = { nocallback nofree nosync nounwind speculatable willreturn memory(none) } # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 8: # | check:8'0 ~ # | 9: !llvm.dbg.cu = !{!0} # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~ # | 10: !llvm.module.flags = !{!2, !3, !4, !5, !6} # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | . # | . # | . # | >>>>>> # | ---------------------------- # | *** Reducing Function Bodies... # | C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll:8:26: error: CHECK-INTERESTINGNESS: expected string not found in input # | ; CHECK-INTERESTINGNESS: call void @llvm.dbg.value(metadata i32 %added, # | ^ # | C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-4951a0.ll:1:1: note: scanning from here # | ; ModuleID = 'C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll' # | ^ # | C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-4951a0.ll:5:3: note: possible intended match here # | declare void @llvm.dbg.value(metadata, metadata, metadata) #0 # | ^ # | # | Input file: C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-4951a0.ll # | Check file: C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll # | # | -dump-input=help explains the following input dump. # | # | Input was: # | <<<<<< # | 1: ; ModuleID = 'C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll' # | check:8'0 X~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ error: no match found # | 2: source_filename = "C:\\src\\llvm-project\\llvm\\test\\tools\\llvm-reduce\\remove-dp-values.ll" # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 3: # | check:8'0 ~ # | 4: ; Function Attrs: nocallback nofree nosync nounwind speculatable willreturn memory(none) # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 5: declare void @llvm.dbg.value(metadata, metadata, metadata) #0 # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | check:8'1 ? possible intended match # | 6: # | check:8'0 ~ # | 7: declare i32 @main() # | check:8'0 ~~~~~~~~~~~~~~~~~~~~ # | 8: # | check:8'0 ~ # | 9: attributes #0 = { nocallback nofree nosync nounwind speculatable willreturn memory(none) } # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 10: # | check:8'0 ~ # | . # | . # | . # | >>>>>> # | ---------------------------- # | *** Reducing Special Globals... # | ---------------------------- # | *** Reducing Aliases... # | ---------------------------- # | *** Reducing Ifuncs... # | ---------------------------- # | *** Reducing conditional branches to true... # | ---------------------------- # | *** Reducing conditional branches to false... # | ---------------------------- # | *** Reducing Invokes... # | ---------------------------- # | *** Removing Unreachable Basic Blocks... # | ---------------------------- # | *** Reducing Basic Blocks... # | ---------------------------- # | *** Reducing using SimplifyCFG... # | **** SUCCESS | Saved new best reduction to C:\src\llvm-project\out\gn\obj\llvm\test\tools\llvm-reduce\Output\remove-dp-values.ll.tmp # | ---------------------------- # | *** Reducing Function Data... # | ---------------------------- # | *** Reducing GlobalValues... # | ---------------------------- # | *** Reducing GlobalObjects... # | ---------------------------- # | *** Reducing GV Initializers... # | ---------------------------- # | *** Reducing GlobalVariables... # | ---------------------------- # | *** Reducing DIMetadata... # | **** SUCCESS | Saved new best reduction to C:\src\llvm-project\out\gn\obj\llvm\test\tools\llvm-reduce\Output\remove-dp-values.ll.tmp # | ---------------------------- # | *** Reducing DbgRecords... # | ---------------------------- # | *** Reducing Metadata... # | **** SUCCESS | Saved new best reduction to C:\src\llvm-project\out\gn\obj\llvm\test\tools\llvm-reduce\Output\remove-dp-values.ll.tmp # | ---------------------------- # | *** Reducing Named Metadata... # | ---------------------------- # | *** Reducing Arguments... # | ---------------------------- # | *** Reducing Instructions... # | C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll:8:26: error: CHECK-INTERESTINGNESS: expected string not found in input # | ; CHECK-INTERESTINGNESS: call void @llvm.dbg.value(metadata i32 %added, # | ^ # | C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-c7bd5a.ll:1:1: note: scanning from here # | ; ModuleID = 'C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll' # | ^ # | C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-c7bd5a.ll:5:3: note: possible intended match here # | declare void @llvm.dbg.value(metadata, metadata, metadata) #0 # | ^ # | # | Input file: C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-c7bd5a.ll # | Check file: C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll # | # | -dump-input=help explains the following input dump. # | # | Input was: # | <<<<<< # | 1: ; ModuleID = 'C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll' # | check:8'0 X~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ error: no match found # | 2: source_filename = "C:\\src\\llvm-project\\llvm\\test\\tools\\llvm-reduce\\remove-dp-values.ll" # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 3: # | check:8'0 ~ # | 4: ; Function Attrs: nocallback nofree nosync nounwind speculatable willreturn memory(none) # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 5: declare void @llvm.dbg.value(metadata, metadata, metadata) #0 # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | check:8'1 ? possible intended match # | 6: # | check:8'0 ~ # | 7: define i32 @main() { # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~ # | 8: entry: # | check:8'0 ~~~~~~~ # | 9: ret i32 0 # | check:8'0 ~~~~~~~~~~~ # | 10: } # | check:8'0 ~~ # | . # | . # | . # | >>>>>> # | C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll:8:26: error: CHECK-INTERESTINGNESS: expected string not found in input # | ; CHECK-INTERESTINGNESS: call void @llvm.dbg.value(metadata i32 %added, # | ^ # | C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-ab04f6.ll:1:1: note: scanning from here # | ; ModuleID = 'C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll' # | ^ # | C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-ab04f6.ll:5:3: note: possible intended match here # | declare void @llvm.dbg.value(metadata, metadata, metadata) #0 # | ^ # | # | Input file: C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-ab04f6.ll # | Check file: C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll # | # | -dump-input=help explains the following input dump. # | # | Input was: # | <<<<<< # | 1: ; ModuleID = 'C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll' # | check:8'0 X~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ error: no match found # | 2: source_filename = "C:\\src\\llvm-project\\llvm\\test\\tools\\llvm-reduce\\remove-dp-values.ll" # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 3: # | check:8'0 ~ # | 4: ; Function Attrs: nocallback nofree nosync nounwind speculatable willreturn memory(none) # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 5: declare void @llvm.dbg.value(metadata, metadata, metadata) #0 # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | check:8'1 ? possible intended match # | 6: # | check:8'0 ~ # | 7: define i32 @main() { # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~ # | 8: entry: # | check:8'0 ~~~~~~~ # | 9: %uninteresting1 = alloca i32, align 4 # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 10: %interesting = alloca i32, align 4 # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | . # | . # | . # | >>>>>> # | C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll:8:26: error: CHECK-INTERESTINGNESS: expected string not found in input # | ; CHECK-INTERESTINGNESS: call void @llvm.dbg.value(metadata i32 %added, # | ^ # | C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-d91426.ll:1:1: note: scanning from here # | ; ModuleID = 'C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll' # | ^ # | C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-d91426.ll:5:3: note: possible intended match here # | declare void @llvm.dbg.value(metadata, metadata, metadata) #0 # | ^ # | # | Input file: C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-d91426.ll # | Check file: C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll # | # | -dump-input=help explains the following input dump. # | # | Input was: # | <<<<<< # | 1: ; ModuleID = 'C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll' # | check:8'0 X~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ error: no match found # | 2: source_filename = "C:\\src\\llvm-project\\llvm\\test\\tools\\llvm-reduce\\remove-dp-values.ll" # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 3: # | check:8'0 ~ # | 4: ; Function Attrs: nocallback nofree nosync nounwind speculatable willreturn memory(none) # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 5: declare void @llvm.dbg.value(metadata, metadata, metadata) #0 # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | check:8'1 ? possible intended match # | 6: # | check:8'0 ~ # | 7: define i32 @main() { # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~ # | 8: entry: # | check:8'0 ~~~~~~~ # | 9: ret i32 0 # | check:8'0 ~~~~~~~~~~~ # | 10: } # | check:8'0 ~~ # | . # | . # | . # | >>>>>> # | C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll:8:26: error: CHECK-INTERESTINGNESS: expected string not found in input # | ; CHECK-INTERESTINGNESS: call void @llvm.dbg.value(metadata i32 %added, # | ^ # | C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-d521a8.ll:1:1: note: scanning from here # | ; ModuleID = 'C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll' # | ^ # | C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-d521a8.ll:5:3: note: possible intended match here # | declare void @llvm.dbg.value(metadata, metadata, metadata) #0 # | ^ # | # | Input file: C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-d521a8.ll # | Check file: C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll # | # | -dump-input=help explains the following input dump. # | # | Input was: # | <<<<<< # | 1: ; ModuleID = 'C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll' # | check:8'0 X~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ error: no match found # | 2: source_filename = "C:\\src\\llvm-project\\llvm\\test\\tools\\llvm-reduce\\remove-dp-values.ll" # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 3: # | check:8'0 ~ # | 4: ; Function Attrs: nocallback nofree nosync nounwind speculatable willreturn memory(none) # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 5: declare void @llvm.dbg.value(metadata, metadata, metadata) #0 # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | check:8'1 ? possible intended match # | 6: # | check:8'0 ~ # | 7: define i32 @main() { # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~ # | 8: entry: # | check:8'0 ~~~~~~~ # | 9: ret i32 0 # | check:8'0 ~~~~~~~~~~~ # | 10: } # | check:8'0 ~~ # | . # | . # | . # | >>>>>> # | C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll:8:26: error: CHECK-INTERESTINGNESS: expected string not found in input # | ; CHECK-INTERESTINGNESS: call void @llvm.dbg.value(metadata i32 %added, # | ^ # | C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-9ea69f.ll:1:1: note: scanning from here # | ; ModuleID = 'C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll' # | ^ # | C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-9ea69f.ll:5:3: note: possible intended match here # | declare void @llvm.dbg.value(metadata, metadata, metadata) #0 # | ^ # | # | Input file: C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-9ea69f.ll # | Check file: C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll # | # | -dump-input=help explains the following input dump. # | # | Input was: # | <<<<<< # | 1: ; ModuleID = 'C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll' # | check:8'0 X~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ error: no match found # | 2: source_filename = "C:\\src\\llvm-project\\llvm\\test\\tools\\llvm-reduce\\remove-dp-values.ll" # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 3: # | check:8'0 ~ # | 4: ; Function Attrs: nocallback nofree nosync nounwind speculatable willreturn memory(none) # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 5: declare void @llvm.dbg.value(metadata, metadata, metadata) #0 # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | check:8'1 ? possible intended match # | 6: # | check:8'0 ~ # | 7: define i32 @main() { # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~ # | 8: entry: # | check:8'0 ~~~~~~~ # | 9: ret i32 0 # | check:8'0 ~~~~~~~~~~~ # | 10: } # | check:8'0 ~~ # | . # | . # | . # | >>>>>> # | C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll:8:26: error: CHECK-INTERESTINGNESS: expected string not found in input # | ; CHECK-INTERESTINGNESS: call void @llvm.dbg.value(metadata i32 %added, # | ^ # | C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-18d588.ll:1:1: note: scanning from here # | ; ModuleID = 'C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll' # | ^ # | C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-18d588.ll:5:3: note: possible intended match here # | declare void @llvm.dbg.value(metadata, metadata, metadata) #0 # | ^ # | # | Input file: C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-18d588.ll # | Check file: C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll # | # | -dump-input=help explains the following input dump. # | # | Input was: # | <<<<<< # | 1: ; ModuleID = 'C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll' # | check:8'0 X~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ error: no match found # | 2: source_filename = "C:\\src\\llvm-project\\llvm\\test\\tools\\llvm-reduce\\remove-dp-values.ll" # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 3: # | check:8'0 ~ # | 4: ; Function Attrs: nocallback nofree nosync nounwind speculatable willreturn memory(none) # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 5: declare void @llvm.dbg.value(metadata, metadata, metadata) #0 # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | check:8'1 ? possible intended match # | 6: # | check:8'0 ~ # | 7: define i32 @main() { # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~ # | 8: entry: # | check:8'0 ~~~~~~~ # | 9: ret i32 0 # | check:8'0 ~~~~~~~~~~~ # | 10: } # | check:8'0 ~~ # | . # | . # | . # | >>>>>> # | C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll:8:26: error: CHECK-INTERESTINGNESS: expected string not found in input # | ; CHECK-INTERESTINGNESS: call void @llvm.dbg.value(metadata i32 %added, # | ^ # | C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-31a9ea.ll:1:1: note: scanning from here # | ; ModuleID = 'C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll' # | ^ # | C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-31a9ea.ll:5:3: note: possible intended match here # | declare void @llvm.dbg.value(metadata, metadata, metadata) #0 # | ^ # | # | Input file: C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-31a9ea.ll # | Check file: C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll # | # | -dump-input=help explains the following input dump. # | # | Input was: # | <<<<<< # | 1: ; ModuleID = 'C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll' # | check:8'0 X~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ error: no match found # | 2: source_filename = "C:\\src\\llvm-project\\llvm\\test\\tools\\llvm-reduce\\remove-dp-values.ll" # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 3: # | check:8'0 ~ # | 4: ; Function Attrs: nocallback nofree nosync nounwind speculatable willreturn memory(none) # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 5: declare void @llvm.dbg.value(metadata, metadata, metadata) #0 # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | check:8'1 ? possible intended match # | 6: # | check:8'0 ~ # | 7: define i32 @main() { # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~ # | 8: entry: # | check:8'0 ~~~~~~~ # | 9: ret i32 0 # | check:8'0 ~~~~~~~~~~~ # | 10: } # | check:8'0 ~~ # | . # | . # | . # | >>>>>> # | C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll:8:26: error: CHECK-INTERESTINGNESS: expected string not found in input # | ; CHECK-INTERESTINGNESS: call void @llvm.dbg.value(metadata i32 %added, # | ^ # | C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-a30622.ll:1:1: note: scanning from here # | ; ModuleID = 'C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll' # | ^ # | C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-a30622.ll:5:3: note: possible intended match here # | declare void @llvm.dbg.value(metadata, metadata, metadata) #0 # | ^ # | # | Input file: C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-a30622.ll # | Check file: C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll # | # | -dump-input=help explains the following input dump. # | # | Input was: # | <<<<<< # | 1: ; ModuleID = 'C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll' # | check:8'0 X~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ error: no match found # | 2: source_filename = "C:\\src\\llvm-project\\llvm\\test\\tools\\llvm-reduce\\remove-dp-values.ll" # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 3: # | check:8'0 ~ # | 4: ; Function Attrs: nocallback nofree nosync nounwind speculatable willreturn memory(none) # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 5: declare void @llvm.dbg.value(metadata, metadata, metadata) #0 # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | check:8'1 ? possible intended match # | 6: # | check:8'0 ~ # | 7: define i32 @main() { # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~ # | 8: entry: # | check:8'0 ~~~~~~~ # | 9: %added = add nsw i32 0, 1 # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 10: ret i32 0 # | check:8'0 ~~~~~~~~~~~ # | . # | . # | . # | >>>>>> # | C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll:8:26: error: CHECK-INTERESTINGNESS: expected string not found in input # | ; CHECK-INTERESTINGNESS: call void @llvm.dbg.value(metadata i32 %added, # | ^ # | C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-20d659.ll:1:1: note: scanning from here # | ; ModuleID = 'C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll' # | ^ # | C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-20d659.ll:9:7: note: possible intended match here # | tail call void @llvm.dbg.value(metadata i32 0, metadata !2, metadata !DIExpression()), !dbg !8 # | ^ # | # | Input file: C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-20d659.ll # | Check file: C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll # | # | -dump-input=help explains the following input dump. # | # | Input was: # | <<<<<< # | 1: ; ModuleID = 'C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll' # | check:8'0 X~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ error: no match found # | 2: source_filename = "C:\\src\\llvm-project\\llvm\\test\\tools\\llvm-reduce\\remove-dp-values.ll" # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 3: # | check:8'0 ~ # | 4: ; Function Attrs: nocallback nofree nosync nounwind speculatable willreturn memory(none) # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 5: declare void @llvm.dbg.value(metadata, metadata, metadata) #0 # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 6: # | check:8'0 ~ # | 7: define i32 @main() { # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~ # | 8: entry: # | check:8'0 ~~~~~~~ # | 9: tail call void @llvm.dbg.value(metadata i32 0, metadata !2, metadata !DIExpression()), !dbg !8 # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | check:8'1 ? possible intended match # | 10: ret i32 0 # | check:8'0 ~~~~~~~~~~~ # | 11: } # | check:8'0 ~~ # | 12: # | check:8'0 ~ # | 13: attributes #0 = { nocallback nofree nosync nounwind speculatable willreturn memory(none) } # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 14: # | check:8'0 ~ # | . # | . # | . # | >>>>>> # | **** SUCCESS | Saved new best reduction to C:\src\llvm-project\out\gn\obj\llvm\test\tools\llvm-reduce\Output\remove-dp-values.ll.tmp # | ---------------------------- # | *** Simplifying Instructions... # | C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll:8:26: error: CHECK-INTERESTINGNESS: expected string not found in input # | ; CHECK-INTERESTINGNESS: call void @llvm.dbg.value(metadata i32 %added, # | ^ # | C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-66f4d2.ll:1:1: note: scanning from here # | ; ModuleID = 'C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll' # | ^ # | C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-66f4d2.ll:9:7: note: possible intended match here # | tail call void @llvm.dbg.value(metadata i32 1, metadata !2, metadata !DIExpression()), !dbg !8 # | ^ # | # | Input file: C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-66f4d2.ll # | Check file: C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll # | # | -dump-input=help explains the following input dump. # | # | Input was: # | <<<<<< # | 1: ; ModuleID = 'C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll' # | check:8'0 X~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ error: no match found # | 2: source_filename = "C:\\src\\llvm-project\\llvm\\test\\tools\\llvm-reduce\\remove-dp-values.ll" # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 3: # | check:8'0 ~ # | 4: ; Function Attrs: nocallback nofree nosync nounwind speculatable willreturn memory(none) # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 5: declare void @llvm.dbg.value(metadata, metadata, metadata) #0 # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 6: # | check:8'0 ~ # | 7: define i32 @main() { # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~ # | 8: entry: # | check:8'0 ~~~~~~~ # | 9: tail call void @llvm.dbg.value(metadata i32 1, metadata !2, metadata !DIExpression()), !dbg !8 # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | check:8'1 ? possible intended match # | 10: ret i32 0 # | check:8'0 ~~~~~~~~~~~ # | 11: } # | check:8'0 ~~ # | 12: # | check:8'0 ~ # | 13: attributes #0 = { nocallback nofree nosync nounwind speculatable willreturn memory(none) } # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 14: # | check:8'0 ~ # | . # | . # | . # | >>>>>> # | ---------------------------- # | *** Running passes... # | C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll:8:26: error: CHECK-INTERESTINGNESS: expected string not found in input # | ; CHECK-INTERESTINGNESS: call void @llvm.dbg.value(metadata i32 %added, # | ^ # | C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-172fdf.ll:1:1: note: scanning from here # | ; ModuleID = 'C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll' # | ^ # | C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-172fdf.ll:6:7: note: possible intended match here # | tail call void @llvm.dbg.value(metadata i32 0, metadata !2, metadata !DIExpression(DW_OP_plus_uconst, 1, DW_OP_stack_value)), !dbg !8 # | ^ # | # | Input file: C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-172fdf.ll # | Check file: C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll # | # | -dump-input=help explains the following input dump. # | # | Input was: # | <<<<<< # | 1: ; ModuleID = 'C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll' # | check:8'0 X~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ error: no match found # | 2: source_filename = "C:\\src\\llvm-project\\llvm\\test\\tools\\llvm-reduce\\remove-dp-values.ll" # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 3: # | check:8'0 ~ # | 4: define i32 @main() { # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~ # | 5: entry: # | check:8'0 ~~~~~~~ # | 6: tail call void @llvm.dbg.value(metadata i32 0, metadata !2, metadata !DIExpression(DW_OP_plus_uconst, 1, DW_OP_stack_value)), !dbg !8 # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | check:8'1 ? possible intended match # | 7: ret i32 0 # | check:8'0 ~~~~~~~~~~~ # | 8: } # | check:8'0 ~~ # | 9: # | check:8'0 ~ # | 10: ; Function Attrs: nocallback nofree nosync nounwind speculatable willreturn memory(none) # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 11: declare void @llvm.dbg.value(metadata, metadata, metadata) #0 # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | . # | . # | . # | >>>>>> # | C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll:8:26: error: CHECK-INTERESTINGNESS: expected string not found in input # | ; CHECK-INTERESTINGNESS: call void @llvm.dbg.value(metadata i32 %added, # | ^ # | C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-9be15c.ll:1:1: note: scanning from here # | ; ModuleID = 'C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll' # | ^ # | C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-9be15c.ll:6:7: note: possible intended match here # | tail call void @llvm.dbg.value(metadata i32 0, metadata !2, metadata !DIExpression(DW_OP_plus_uconst, 1, DW_OP_stack_value)), !dbg !8 # | ^ # | # | Input file: C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-9be15c.ll # | Check file: C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll # | # | -dump-input=help explains the following input dump. # | # | Input was: # | <<<<<< # | 1: ; ModuleID = 'C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll' # | check:8'0 X~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ error: no match found # | 2: source_filename = "C:\\src\\llvm-project\\llvm\\test\\tools\\llvm-reduce\\remove-dp-values.ll" # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 3: # | check:8'0 ~ # | 4: define i32 @main() { # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~ # | 5: entry: # | check:8'0 ~~~~~~~ # | 6: tail call void @llvm.dbg.value(metadata i32 0, metadata !2, metadata !DIExpression(DW_OP_plus_uconst, 1, DW_OP_stack_value)), !dbg !8 # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | check:8'1 ? possible intended match # | 7: ret i32 0 # | check:8'0 ~~~~~~~~~~~ # | 8: } # | check:8'0 ~~ # | 9: # | check:8'0 ~ # | 10: ; Function Attrs: nocallback nofree nosync nounwind speculatable willreturn memory(none) # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 11: declare void @llvm.dbg.value(metadata, metadata, metadata) #0 # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | . # | . # | . # | >>>>>> # | C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll:8:26: error: CHECK-INTERESTINGNESS: expected string not found in input # | ; CHECK-INTERESTINGNESS: call void @llvm.dbg.value(metadata i32 %added, # | ^ # | C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-761bbe.ll:1:1: note: scanning from here # | ; ModuleID = 'C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll' # | ^ # | C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-761bbe.ll:6:7: note: possible intended match here # | tail call void @llvm.dbg.value(metadata i32 0, metadata !2, metadata !DIExpression(DW_OP_plus_uconst, 1, DW_OP_stack_value)), !dbg !8 # | ^ # | # | Input file: C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-761bbe.ll # | Check file: C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll # | # | -dump-input=help explains the following input dump. # | # | Input was: # | <<<<<< # | 1: ; ModuleID = 'C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll' # | check:8'0 X~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ error: no match found # | 2: source_filename = "C:\\src\\llvm-project\\llvm\\test\\tools\\llvm-reduce\\remove-dp-values.ll" # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 3: # | check:8'0 ~ # | 4: define i32 @main() { # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~ # | 5: entry: # | check:8'0 ~~~~~~~ # | 6: tail call void @llvm.dbg.value(metadata i32 0, metadata !2, metadata !DIExpression(DW_OP_plus_uconst, 1, DW_OP_stack_value)), !dbg !8 # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | check:8'1 ? possible intended match # | 7: ret i32 0 # | check:8'0 ~~~~~~~~~~~ # | 8: } # | check:8'0 ~~ # | 9: # | check:8'0 ~ # | 10: ; Function Attrs: nocallback nofree nosync nounwind speculatable willreturn memory(none) # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 11: declare void @llvm.dbg.value(metadata, metadata, metadata) #0 # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | . # | . # | . # | >>>>>> # | C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll:8:26: error: CHECK-INTERESTINGNESS: expected string not found in input # | ; CHECK-INTERESTINGNESS: call void @llvm.dbg.value(metadata i32 %added, # | ^ # | C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-eacd96.ll:1:1: note: scanning from here # | ; ModuleID = 'C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll' # | ^ # | C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-eacd96.ll:6:7: note: possible intended match here # | tail call void @llvm.dbg.value(metadata i32 0, metadata !2, metadata !DIExpression(DW_OP_plus_uconst, 1, DW_OP_stack_value)), !dbg !8 # | ^ # | # | Input file: C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-eacd96.ll # | Check file: C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll # | # | -dump-input=help explains the following input dump. # | # | Input was: # | <<<<<< # | 1: ; ModuleID = 'C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll' # | check:8'0 X~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ error: no match found # | 2: source_filename = "C:\\src\\llvm-project\\llvm\\test\\tools\\llvm-reduce\\remove-dp-values.ll" # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 3: # | check:8'0 ~ # | 4: define i32 @main() { # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~ # | 5: entry: # | check:8'0 ~~~~~~~ # | 6: tail call void @llvm.dbg.value(metadata i32 0, metadata !2, metadata !DIExpression(DW_OP_plus_uconst, 1, DW_OP_stack_value)), !dbg !8 # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | check:8'1 ? possible intended match # | 7: ret i32 0 # | check:8'0 ~~~~~~~~~~~ # | 8: } # | check:8'0 ~~ # | 9: # | check:8'0 ~ # | 10: ; Function Attrs: nocallback nofree nosync nounwind speculatable willreturn memory(none) # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 11: declare void @llvm.dbg.value(metadata, metadata, metadata) #0 # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | . # | . # | . # | >>>>>> # | C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll:8:26: error: CHECK-INTERESTINGNESS: expected string not found in input # | ; CHECK-INTERESTINGNESS: call void @llvm.dbg.value(metadata i32 %added, # | ^ # | C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-c48a89.ll:1:1: note: scanning from here # | ; ModuleID = 'C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll' # | ^ # | C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-c48a89.ll:6:7: note: possible intended match here # | tail call void @llvm.dbg.value(metadata i32 0, metadata !2, metadata !DIExpression(DW_OP_plus_uconst, 1, DW_OP_stack_value)), !dbg !8 # | ^ # | # | Input file: C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-c48a89.ll # | Check file: C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll # | # | -dump-input=help explains the following input dump. # | # | Input was: # | <<<<<< # | 1: ; ModuleID = 'C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll' # | check:8'0 X~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ error: no match found # | 2: source_filename = "C:\\src\\llvm-project\\llvm\\test\\tools\\llvm-reduce\\remove-dp-values.ll" # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 3: # | check:8'0 ~ # | 4: define i32 @main() { # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~ # | 5: entry: # | check:8'0 ~~~~~~~ # | 6: tail call void @llvm.dbg.value(metadata i32 0, metadata !2, metadata !DIExpression(DW_OP_plus_uconst, 1, DW_OP_stack_value)), !dbg !8 # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | check:8'1 ? possible intended match # | 7: ret i32 0 # | check:8'0 ~~~~~~~~~~~ # | 8: } # | check:8'0 ~~ # | 9: # | check:8'0 ~ # | 10: ; Function Attrs: nocallback nofree nosync nounwind speculatable willreturn memory(none) # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 11: declare void @llvm.dbg.value(metadata, metadata, metadata) #0 # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | . # | . # | . # | >>>>>> # | C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll:8:26: error: CHECK-INTERESTINGNESS: expected string not found in input # | ; CHECK-INTERESTINGNESS: call void @llvm.dbg.value(metadata i32 %added, # | ^ # | C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-51b0ad.ll:1:1: note: scanning from here # | ; ModuleID = 'C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll' # | ^ # | C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-51b0ad.ll:6:7: note: possible intended match here # | tail call void @llvm.dbg.value(metadata i32 0, metadata !2, metadata !DIExpression(DW_OP_plus_uconst, 1, DW_OP_stack_value)), !dbg !8 # | ^ # | # | Input file: C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-51b0ad.ll # | Check file: C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll # | # | -dump-input=help explains the following input dump. # | # | Input was: # | <<<<<< # | 1: ; ModuleID = 'C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll' # | check:8'0 X~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ error: no match found # | 2: source_filename = "C:\\src\\llvm-project\\llvm\\test\\tools\\llvm-reduce\\remove-dp-values.ll" # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 3: # | check:8'0 ~ # | 4: define i32 @main() { # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~ # | 5: entry: # | check:8'0 ~~~~~~~ # | 6: tail call void @llvm.dbg.value(metadata i32 0, metadata !2, metadata !DIExpression(DW_OP_plus_uconst, 1, DW_OP_stack_value)), !dbg !8 # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | check:8'1 ? possible intended match # | 7: ret i32 0 # | check:8'0 ~~~~~~~~~~~ # | 8: } # | check:8'0 ~~ # | 9: # | check:8'0 ~ # | 10: ; Function Attrs: nocallback nofree nosync nounwind speculatable willreturn memory(none) # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 11: declare void @llvm.dbg.value(metadata, metadata, metadata) #0 # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | . # | . # | . # | >>>>>> # | C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll:8:26: error: CHECK-INTERESTINGNESS: expected string not found in input # | ; CHECK-INTERESTINGNESS: call void @llvm.dbg.value(metadata i32 %added, # | ^ # | C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-161d37.ll:1:1: note: scanning from here # | ; ModuleID = 'C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll' # | ^ # | C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-161d37.ll:6:7: note: possible intended match here # | tail call void @llvm.dbg.value(metadata i32 0, metadata !2, metadata !DIExpression(DW_OP_plus_uconst, 1, DW_OP_stack_value)), !dbg !8 # | ^ # | # | Input file: C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-161d37.ll # | Check file: C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll # | # | -dump-input=help explains the following input dump. # | # | Input was: # | <<<<<< # | 1: ; ModuleID = 'C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll' # | check:8'0 X~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ error: no match found # | 2: source_filename = "C:\\src\\llvm-project\\llvm\\test\\tools\\llvm-reduce\\remove-dp-values.ll" # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 3: # | check:8'0 ~ # | 4: define i32 @main() { # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~ # | 5: entry: # | check:8'0 ~~~~~~~ # | 6: tail call void @llvm.dbg.value(metadata i32 0, metadata !2, metadata !DIExpression(DW_OP_plus_uconst, 1, DW_OP_stack_value)), !dbg !8 # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | check:8'1 ? possible intended match # | 7: ret i32 0 # | check:8'0 ~~~~~~~~~~~ # | 8: } # | check:8'0 ~~ # | 9: # | check:8'0 ~ # | 10: ; Function Attrs: nocallback nofree nosync nounwind speculatable willreturn memory(none) # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 11: declare void @llvm.dbg.value(metadata, metadata, metadata) #0 # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | . # | . # | . # | >>>>>> # | C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll:8:26: error: CHECK-INTERESTINGNESS: expected string not found in input # | ; CHECK-INTERESTINGNESS: call void @llvm.dbg.value(metadata i32 %added, # | ^ # | C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-b2a2f2.ll:1:1: note: scanning from here # | ; ModuleID = 'C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll' # | ^ # | C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-b2a2f2.ll:6:7: note: possible intended match here # | tail call void @llvm.dbg.value(metadata i32 0, metadata !2, metadata !DIExpression(DW_OP_plus_uconst, 1, DW_OP_stack_value)), !dbg !8 # | ^ # | # | Input file: C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-b2a2f2.ll # | Check file: C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll # | # | -dump-input=help explains the following input dump. # | # | Input was: # | <<<<<< # | 1: ; ModuleID = 'C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll' # | check:8'0 X~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ error: no match found # | 2: source_filename = "C:\\src\\llvm-project\\llvm\\test\\tools\\llvm-reduce\\remove-dp-values.ll" # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 3: # | check:8'0 ~ # | 4: define i32 @main() { # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~ # | 5: entry: # | check:8'0 ~~~~~~~ # | 6: tail call void @llvm.dbg.value(metadata i32 0, metadata !2, metadata !DIExpression(DW_OP_plus_uconst, 1, DW_OP_stack_value)), !dbg !8 # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | check:8'1 ? possible intended match # | 7: ret i32 0 # | check:8'0 ~~~~~~~~~~~ # | 8: } # | check:8'0 ~~ # | 9: # | check:8'0 ~ # | 10: ; Function Attrs: nocallback nofree nosync nounwind speculatable willreturn memory(none) # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 11: declare void @llvm.dbg.value(metadata, metadata, metadata) #0 # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | . # | . # | . # | >>>>>> # | C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll:8:26: error: CHECK-INTERESTINGNESS: expected string not found in input # | ; CHECK-INTERESTINGNESS: call void @llvm.dbg.value(metadata i32 %added, # | ^ # | C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-24d6c7.ll:1:1: note: scanning from here # | ; ModuleID = 'C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll' # | ^ # | C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-24d6c7.ll:6:7: note: possible intended match here # | tail call void @llvm.dbg.value(metadata i32 0, metadata !2, metadata !DIExpression(DW_OP_plus_uconst, 1, DW_OP_stack_value)), !dbg !8 # | ^ # | # | Input file: C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-24d6c7.ll # | Check file: C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll # | # | -dump-input=help explains the following input dump. # | # | Input was: # | <<<<<< # | 1: ; ModuleID = 'C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll' # | check:8'0 X~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ error: no match found # | 2: source_filename = "C:\\src\\llvm-project\\llvm\\test\\tools\\llvm-reduce\\remove-dp-values.ll" # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 3: # | check:8'0 ~ # | 4: define i32 @main() { # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~ # | 5: entry: # | check:8'0 ~~~~~~~ # | 6: tail call void @llvm.dbg.value(metadata i32 0, metadata !2, metadata !DIExpression(DW_OP_plus_uconst, 1, DW_OP_stack_value)), !dbg !8 # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | check:8'1 ? possible intended match # | 7: ret i32 0 # | check:8'0 ~~~~~~~~~~~ # | 8: } # | check:8'0 ~~ # | 9: # | check:8'0 ~ # | 10: ; Function Attrs: nocallback nofree nosync nounwind speculatable willreturn memory(none) # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 11: declare void @llvm.dbg.value(metadata, metadata, metadata) #0 # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | . # | . # | . # | >>>>>> # | **** SUCCESS | Saved new best reduction to C:\src\llvm-project\out\gn\obj\llvm\test\tools\llvm-reduce\Output\remove-dp-values.ll.tmp # | ---------------------------- # | *** Reducing Operands to zero... # | **** SUCCESS | Saved new best reduction to C:\src\llvm-project\out\gn\obj\llvm\test\tools\llvm-reduce\Output\remove-dp-values.ll.tmp # | ---------------------------- # | *** Reducing Operands to one... # | ---------------------------- # | *** Reducing Operands to NaN... # | ---------------------------- # | *** Converting operands to function arguments... # | ---------------------------- # | *** Reducing operands by skipping over instructions... # | ---------------------------- # | *** Reducing Operand Bundles... # | ---------------------------- # | *** Reducing Attributes... # | ---------------------------- # | *** Reducing Module Data... # | **** SUCCESS | Saved new best reduction to C:\src\llvm-project\out\gn\obj\llvm\test\tools\llvm-reduce\Output\remove-dp-values.ll.tmp # | ---------------------------- # | *** Reducing Opcodes... # | **** SUCCESS | Saved new best reduction to C:\src\llvm-project\out\gn\obj\llvm\test\tools\llvm-reduce\Output\remove-dp-values.ll.tmp # | ---------------------------- # | *** Reducing Volatile Instructions... # | ---------------------------- # | *** Reducing Atomic Ordering... # | ---------------------------- # | *** Reducing Atomic Sync Scopes... # | ---------------------------- # | *** Reducing Instruction Flags... # | **** SUCCESS | Saved new best reduction to C:\src\llvm-project\out\gn\obj\llvm\test\tools\llvm-reduce\Output\remove-dp-values.ll.tmp # | ---------------------------- # | *** Stripping Debug Info... # | C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll:8:26: error: CHECK-INTERESTINGNESS: expected string not found in input # | ; CHECK-INTERESTINGNESS: call void @llvm.dbg.value(metadata i32 %added, # | ^ # | C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-b85371.ll:1:1: note: scanning from here # | # | ^ # | C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-b85371.ll:9:3: note: possible intended match here # | declare void @llvm.dbg.value(metadata, metadata, metadata) #0 # | ^ # | # | Input file: C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-b85371.ll # | Check file: C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll # | # | -dump-input=help explains the following input dump. # | # | Input was: # | <<<<<< # | 1: # | check:8'0 X error: no match found # | 2: define i32 @main() { # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~ # | 3: entry: # | check:8'0 ~~~~~~~ # | 4: %added = add i32 0, 0 # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~ # | 5: ret i32 0 # | check:8'0 ~~~~~~~~~~~ # | 6: } # | check:8'0 ~~ # | 7: # | check:8'0 ~ # | 8: ; Function Attrs: nocallback nofree nosync nounwind speculatable willreturn memory(none) # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 9: declare void @llvm.dbg.value(metadata, metadata, metadata) #0 # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | check:8'1 ? possible intended match # | 10: # | check:8'0 ~ # | 11: attributes #0 = { nocallback nofree nosync nounwind speculatable willreturn memory(none) } # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | >>>>>> # | ---------------------------- # | *** Reducing Functions... # | C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll:8:26: error: CHECK-INTERESTINGNESS: expected string not found in input # | ; CHECK-INTERESTINGNESS: call void @llvm.dbg.value(metadata i32 %added, # | ^ # | C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-5a219f.ll:1:1: note: scanning from here # | # | ^ # | C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-5a219f.ll:3:3: note: possible intended match here # | declare void @llvm.dbg.value(metadata, metadata, metadata) #0 # | ^ # | # | Input file: C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-5a219f.ll # | Check file: C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll # | # | -dump-input=help explains the following input dump. # | # | Input was: # | <<<<<< # | 1: # | check:8'0 X error: no match found # | 2: ; Function Attrs: nocallback nofree nosync nounwind speculatable willreturn memory(none) # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 3: declare void @llvm.dbg.value(metadata, metadata, metadata) #0 # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | check:8'1 ? possible intended match # | 4: # | check:8'0 ~ # | 5: attributes #0 = { nocallback nofree nosync nounwind speculatable willreturn memory(none) } # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 6: # | check:8'0 ~ # | 7: !llvm.dbg.cu = !{!0} # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~ # | 8: # | check:8'0 ~ # | . # | . # | . # | >>>>>> # | ---------------------------- # | *** Reducing Function Bodies... # | C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll:8:26: error: CHECK-INTERESTINGNESS: expected string not found in input # | ; CHECK-INTERESTINGNESS: call void @llvm.dbg.value(metadata i32 %added, # | ^ # | C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-3f8a3c.ll:1:1: note: scanning from here # | # | ^ # | C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-3f8a3c.ll:5:3: note: possible intended match here # | declare void @llvm.dbg.value(metadata, metadata, metadata) #0 # | ^ # | # | Input file: C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-3f8a3c.ll # | Check file: C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll # | # | -dump-input=help explains the following input dump. # | # | Input was: # | <<<<<< # | 1: # | check:8'0 X error: no match found # | 2: declare i32 @main() # | check:8'0 ~~~~~~~~~~~~~~~~~~~~ # | 3: # | check:8'0 ~ # | 4: ; Function Attrs: nocallback nofree nosync nounwind speculatable willreturn memory(none) # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 5: declare void @llvm.dbg.value(metadata, metadata, metadata) #0 # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | check:8'1 ? possible intended match # | 6: # | check:8'0 ~ # | 7: attributes #0 = { nocallback nofree nosync nounwind speculatable willreturn memory(none) } # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 8: # | check:8'0 ~ # | 9: !llvm.dbg.cu = !{!0} # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~ # | 10: # | check:8'0 ~ # | . # | . # | . # | >>>>>> # | ---------------------------- # | *** Reducing Special Globals... # | ---------------------------- # | *** Reducing Aliases... # | ---------------------------- # | *** Reducing Ifuncs... # | ---------------------------- # | *** Reducing conditional branches to true... # | ---------------------------- # | *** Reducing conditional branches to false... # | ---------------------------- # | *** Reducing Invokes... # | ---------------------------- # | *** Removing Unreachable Basic Blocks... # | ---------------------------- # | *** Reducing Basic Blocks... # | ---------------------------- # | *** Reducing using SimplifyCFG... # | **** SUCCESS | Saved new best reduction to C:\src\llvm-project\out\gn\obj\llvm\test\tools\llvm-reduce\Output\remove-dp-values.ll.tmp # | ---------------------------- # | *** Reducing Function Data... # | ---------------------------- # | *** Reducing GlobalValues... # | ---------------------------- # | *** Reducing GlobalObjects... # | ---------------------------- # | *** Reducing GV Initializers... # | ---------------------------- # | *** Reducing GlobalVariables... # | ---------------------------- # | *** Reducing DIMetadata... # | ---------------------------- # | *** Reducing DbgRecords... # | ---------------------------- # | *** Reducing Metadata... # | ---------------------------- # | *** Reducing Named Metadata... # | ---------------------------- # | *** Reducing Arguments... # | ---------------------------- # | *** Reducing Instructions... # | C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll:8:26: error: CHECK-INTERESTINGNESS: expected string not found in input # | ; CHECK-INTERESTINGNESS: call void @llvm.dbg.value(metadata i32 %added, # | ^ # | C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-e449ea.ll:1:1: note: scanning from here # | # | ^ # | C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-e449ea.ll:8:3: note: possible intended match here # | declare void @llvm.dbg.value(metadata, metadata, metadata) #0 # | ^ # | # | Input file: C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-e449ea.ll # | Check file: C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll # | # | -dump-input=help explains the following input dump. # | # | Input was: # | <<<<<< # | 1: # | check:8'0 X error: no match found # | 2: define i32 @main() { # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~ # | 3: entry: # | check:8'0 ~~~~~~~ # | 4: ret i32 0 # | check:8'0 ~~~~~~~~~~~ # | 5: } # | check:8'0 ~~ # | 6: # | check:8'0 ~ # | 7: ; Function Attrs: nocallback nofree nosync nounwind speculatable willreturn memory(none) # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 8: declare void @llvm.dbg.value(metadata, metadata, metadata) #0 # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | check:8'1 ? possible intended match # | 9: # | check:8'0 ~ # | 10: attributes #0 = { nocallback nofree nosync nounwind speculatable willreturn memory(none) } # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 11: # | check:8'0 ~ # | 12: !llvm.dbg.cu = !{!0} # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~ # | 13: # | check:8'0 ~ # | . # | . # | . # | >>>>>> # | C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll:8:26: error: CHECK-INTERESTINGNESS: expected string not found in input # | ; CHECK-INTERESTINGNESS: call void @llvm.dbg.value(metadata i32 %added, # | ^ # | C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-e34945.ll:1:1: note: scanning from here # | # | ^ # | C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-e34945.ll:9:3: note: possible intended match here # | declare void @llvm.dbg.value(metadata, metadata, metadata) #0 # | ^ # | # | Input file: C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-e34945.ll # | Check file: C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll # | # | -dump-input=help explains the following input dump. # | # | Input was: # | <<<<<< # | 1: # | check:8'0 X error: no match found # | 2: define i32 @main() { # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~ # | 3: entry: # | check:8'0 ~~~~~~~ # | 4: %added = add i32 0, 0 # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~ # | 5: ret i32 0 # | check:8'0 ~~~~~~~~~~~ # | 6: } # | check:8'0 ~~ # | 7: # | check:8'0 ~ # | 8: ; Function Attrs: nocallback nofree nosync nounwind speculatable willreturn memory(none) # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 9: declare void @llvm.dbg.value(metadata, metadata, metadata) #0 # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | check:8'1 ? possible intended match # | 10: # | check:8'0 ~ # | 11: attributes #0 = { nocallback nofree nosync nounwind speculatable willreturn memory(none) } # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 12: # | check:8'0 ~ # | 13: !llvm.dbg.cu = !{!0} # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~ # | 14: # | check:8'0 ~ # | . # | . # | . # | >>>>>> # | C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll:8:26: error: CHECK-INTERESTINGNESS: expected string not found in input # | ; CHECK-INTERESTINGNESS: call void @llvm.dbg.value(metadata i32 %added, # | ^ # | C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-b00723.ll:1:1: note: scanning from here # | # | ^ # | C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-b00723.ll:4:7: note: possible intended match here # | tail call void @llvm.dbg.value(metadata i32 0, metadata !2, metadata !DIExpression()), !dbg !8 # | ^ # | # | Input file: C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-b00723.ll # | Check file: C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll # | # | -dump-input=help explains the following input dump. # | # | Input was: # | <<<<<< # | 1: # | check:8'0 X error: no match found # | 2: define i32 @main() { # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~ # | 3: entry: # | check:8'0 ~~~~~~~ # | 4: tail call void @llvm.dbg.value(metadata i32 0, metadata !2, metadata !DIExpression()), !dbg !8 # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | check:8'1 ? possible intended match # | 5: ret i32 0 # | check:8'0 ~~~~~~~~~~~ # | 6: } # | check:8'0 ~~ # | 7: # | check:8'0 ~ # | 8: ; Function Attrs: nocallback nofree nosync nounwind speculatable willreturn memory(none) # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 9: declare void @llvm.dbg.value(metadata, metadata, metadata) #0 # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | . # | . # | . # | >>>>>> # | ---------------------------- # | *** Simplifying Instructions... # | C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll:8:26: error: CHECK-INTERESTINGNESS: expected string not found in input # | ; CHECK-INTERESTINGNESS: call void @llvm.dbg.value(metadata i32 %added, # | ^ # | C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-7f1a5d.ll:1:1: note: scanning from here # | # | ^ # | C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-7f1a5d.ll:4:7: note: possible intended match here # | tail call void @llvm.dbg.value(metadata i32 0, metadata !2, metadata !DIExpression()), !dbg !8 # | ^ # | # | Input file: C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-7f1a5d.ll # | Check file: C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll # | # | -dump-input=help explains the following input dump. # | # | Input was: # | <<<<<< # | 1: # | check:8'0 X error: no match found # | 2: define i32 @main() { # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~ # | 3: entry: # | check:8'0 ~~~~~~~ # | 4: tail call void @llvm.dbg.value(metadata i32 0, metadata !2, metadata !DIExpression()), !dbg !8 # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | check:8'1 ? possible intended match # | 5: ret i32 0 # | check:8'0 ~~~~~~~~~~~ # | 6: } # | check:8'0 ~~ # | 7: # | check:8'0 ~ # | 8: ; Function Attrs: nocallback nofree nosync nounwind speculatable willreturn memory(none) # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 9: declare void @llvm.dbg.value(metadata, metadata, metadata) #0 # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | . # | . # | . # | >>>>>> # | ---------------------------- # | *** Running passes... # | C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll:8:26: error: CHECK-INTERESTINGNESS: expected string not found in input # | ; CHECK-INTERESTINGNESS: call void @llvm.dbg.value(metadata i32 %added, # | ^ # | C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-2dbae0.ll:1:1: note: scanning from here # | # | ^ # | C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-2dbae0.ll:4:7: note: possible intended match here # | tail call void @llvm.dbg.value(metadata i32 0, metadata !2, metadata !DIExpression()), !dbg !8 # | ^ # | # | Input file: C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-2dbae0.ll # | Check file: C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll # | # | -dump-input=help explains the following input dump. # | # | Input was: # | <<<<<< # | 1: # | check:8'0 X error: no match found # | 2: define i32 @main() { # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~ # | 3: entry: # | check:8'0 ~~~~~~~ # | 4: tail call void @llvm.dbg.value(metadata i32 0, metadata !2, metadata !DIExpression()), !dbg !8 # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | check:8'1 ? possible intended match # | 5: ret i32 0 # | check:8'0 ~~~~~~~~~~~ # | 6: } # | check:8'0 ~~ # | 7: # | check:8'0 ~ # | 8: ; Function Attrs: nocallback nofree nosync nounwind speculatable willreturn memory(none) # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 9: declare void @llvm.dbg.value(metadata, metadata, metadata) #0 # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | . # | . # | . # | >>>>>> # | C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll:8:26: error: CHECK-INTERESTINGNESS: expected string not found in input # | ; CHECK-INTERESTINGNESS: call void @llvm.dbg.value(metadata i32 %added, # | ^ # | C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-f9859f.ll:1:1: note: scanning from here # | # | ^ # | C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-f9859f.ll:4:7: note: possible intended match here # | tail call void @llvm.dbg.value(metadata i32 0, metadata !2, metadata !DIExpression()), !dbg !8 # | ^ # | # | Input file: C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-f9859f.ll # | Check file: C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll # | # | -dump-input=help explains the following input dump. # | # | Input was: # | <<<<<< # | 1: # | check:8'0 X error: no match found # | 2: define i32 @main() { # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~ # | 3: entry: # | check:8'0 ~~~~~~~ # | 4: tail call void @llvm.dbg.value(metadata i32 0, metadata !2, metadata !DIExpression()), !dbg !8 # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | check:8'1 ? possible intended match # | 5: ret i32 0 # | check:8'0 ~~~~~~~~~~~ # | 6: } # | check:8'0 ~~ # | 7: # | check:8'0 ~ # | 8: ; Function Attrs: nocallback nofree nosync nounwind speculatable willreturn memory(none) # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 9: declare void @llvm.dbg.value(metadata, metadata, metadata) #0 # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | . # | . # | . # | >>>>>> # | C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll:8:26: error: CHECK-INTERESTINGNESS: expected string not found in input # | ; CHECK-INTERESTINGNESS: call void @llvm.dbg.value(metadata i32 %added, # | ^ # | C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-031759.ll:1:1: note: scanning from here # | # | ^ # | C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-031759.ll:4:7: note: possible intended match here # | tail call void @llvm.dbg.value(metadata i32 0, metadata !2, metadata !DIExpression()), !dbg !8 # | ^ # | # | Input file: C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-031759.ll # | Check file: C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll # | # | -dump-input=help explains the following input dump. # | # | Input was: # | <<<<<< # | 1: # | check:8'0 X error: no match found # | 2: define i32 @main() { # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~ # | 3: entry: # | check:8'0 ~~~~~~~ # | 4: tail call void @llvm.dbg.value(metadata i32 0, metadata !2, metadata !DIExpression()), !dbg !8 # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | check:8'1 ? possible intended match # | 5: ret i32 0 # | check:8'0 ~~~~~~~~~~~ # | 6: } # | check:8'0 ~~ # | 7: # | check:8'0 ~ # | 8: ; Function Attrs: nocallback nofree nosync nounwind speculatable willreturn memory(none) # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 9: declare void @llvm.dbg.value(metadata, metadata, metadata) #0 # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | . # | . # | . # | >>>>>> # | C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll:8:26: error: CHECK-INTERESTINGNESS: expected string not found in input # | ; CHECK-INTERESTINGNESS: call void @llvm.dbg.value(metadata i32 %added, # | ^ # | C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-c70abc.ll:1:1: note: scanning from here # | # | ^ # | C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-c70abc.ll:4:7: note: possible intended match here # | tail call void @llvm.dbg.value(metadata i32 0, metadata !2, metadata !DIExpression()), !dbg !8 # | ^ # | # | Input file: C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-c70abc.ll # | Check file: C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll # | # | -dump-input=help explains the following input dump. # | # | Input was: # | <<<<<< # | 1: # | check:8'0 X error: no match found # | 2: define i32 @main() { # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~ # | 3: entry: # | check:8'0 ~~~~~~~ # | 4: tail call void @llvm.dbg.value(metadata i32 0, metadata !2, metadata !DIExpression()), !dbg !8 # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | check:8'1 ? possible intended match # | 5: ret i32 0 # | check:8'0 ~~~~~~~~~~~ # | 6: } # | check:8'0 ~~ # | 7: # | check:8'0 ~ # | 8: ; Function Attrs: nocallback nofree nosync nounwind speculatable willreturn memory(none) # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 9: declare void @llvm.dbg.value(metadata, metadata, metadata) #0 # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | . # | . # | . # | >>>>>> # | C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll:8:26: error: CHECK-INTERESTINGNESS: expected string not found in input # | ; CHECK-INTERESTINGNESS: call void @llvm.dbg.value(metadata i32 %added, # | ^ # | C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-7c81c7.ll:1:1: note: scanning from here # | # | ^ # | C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-7c81c7.ll:4:7: note: possible intended match here # | tail call void @llvm.dbg.value(metadata i32 0, metadata !2, metadata !DIExpression()), !dbg !8 # | ^ # | # | Input file: C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-7c81c7.ll # | Check file: C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll # | # | -dump-input=help explains the following input dump. # | # | Input was: # | <<<<<< # | 1: # | check:8'0 X error: no match found # | 2: define i32 @main() { # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~ # | 3: entry: # | check:8'0 ~~~~~~~ # | 4: tail call void @llvm.dbg.value(metadata i32 0, metadata !2, metadata !DIExpression()), !dbg !8 # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | check:8'1 ? possible intended match # | 5: ret i32 0 # | check:8'0 ~~~~~~~~~~~ # | 6: } # | check:8'0 ~~ # | 7: # | check:8'0 ~ # | 8: ; Function Attrs: nocallback nofree nosync nounwind speculatable willreturn memory(none) # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 9: declare void @llvm.dbg.value(metadata, metadata, metadata) #0 # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | . # | . # | . # | >>>>>> # | C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll:8:26: error: CHECK-INTERESTINGNESS: expected string not found in input # | ; CHECK-INTERESTINGNESS: call void @llvm.dbg.value(metadata i32 %added, # | ^ # | C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-edd18c.ll:1:1: note: scanning from here # | # | ^ # | C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-edd18c.ll:4:7: note: possible intended match here # | tail call void @llvm.dbg.value(metadata i32 0, metadata !2, metadata !DIExpression()), !dbg !8 # | ^ # | # | Input file: C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-edd18c.ll # | Check file: C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll # | # | -dump-input=help explains the following input dump. # | # | Input was: # | <<<<<< # | 1: # | check:8'0 X error: no match found # | 2: define i32 @main() { # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~ # | 3: entry: # | check:8'0 ~~~~~~~ # | 4: tail call void @llvm.dbg.value(metadata i32 0, metadata !2, metadata !DIExpression()), !dbg !8 # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | check:8'1 ? possible intended match # | 5: ret i32 0 # | check:8'0 ~~~~~~~~~~~ # | 6: } # | check:8'0 ~~ # | 7: # | check:8'0 ~ # | 8: ; Function Attrs: nocallback nofree nosync nounwind speculatable willreturn memory(none) # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 9: declare void @llvm.dbg.value(metadata, metadata, metadata) #0 # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | . # | . # | . # | >>>>>> # | C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll:8:26: error: CHECK-INTERESTINGNESS: expected string not found in input # | ; CHECK-INTERESTINGNESS: call void @llvm.dbg.value(metadata i32 %added, # | ^ # | C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-79bd8b.ll:1:1: note: scanning from here # | # | ^ # | C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-79bd8b.ll:4:7: note: possible intended match here # | tail call void @llvm.dbg.value(metadata i32 0, metadata !2, metadata !DIExpression()), !dbg !8 # | ^ # | # | Input file: C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-79bd8b.ll # | Check file: C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll # | # | -dump-input=help explains the following input dump. # | # | Input was: # | <<<<<< # | 1: # | check:8'0 X error: no match found # | 2: define i32 @main() { # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~ # | 3: entry: # | check:8'0 ~~~~~~~ # | 4: tail call void @llvm.dbg.value(metadata i32 0, metadata !2, metadata !DIExpression()), !dbg !8 # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | check:8'1 ? possible intended match # | 5: ret i32 0 # | check:8'0 ~~~~~~~~~~~ # | 6: } # | check:8'0 ~~ # | 7: # | check:8'0 ~ # | 8: ; Function Attrs: nocallback nofree nosync nounwind speculatable willreturn memory(none) # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 9: declare void @llvm.dbg.value(metadata, metadata, metadata) #0 # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | . # | . # | . # | >>>>>> # | C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll:8:26: error: CHECK-INTERESTINGNESS: expected string not found in input # | ; CHECK-INTERESTINGNESS: call void @llvm.dbg.value(metadata i32 %added, # | ^ # | C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-9f02a8.ll:1:1: note: scanning from here # | # | ^ # | C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-9f02a8.ll:4:7: note: possible intended match here # | tail call void @llvm.dbg.value(metadata i32 0, metadata !2, metadata !DIExpression()), !dbg !8 # | ^ # | # | Input file: C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-9f02a8.ll # | Check file: C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll # | # | -dump-input=help explains the following input dump. # | # | Input was: # | <<<<<< # | 1: # | check:8'0 X error: no match found # | 2: define i32 @main() { # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~ # | 3: entry: # | check:8'0 ~~~~~~~ # | 4: tail call void @llvm.dbg.value(metadata i32 0, metadata !2, metadata !DIExpression()), !dbg !8 # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | check:8'1 ? possible intended match # | 5: ret i32 0 # | check:8'0 ~~~~~~~~~~~ # | 6: } # | check:8'0 ~~ # | 7: # | check:8'0 ~ # | 8: ; Function Attrs: nocallback nofree nosync nounwind speculatable willreturn memory(none) # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 9: declare void @llvm.dbg.value(metadata, metadata, metadata) #0 # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | . # | . # | . # | >>>>>> # | C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll:8:26: error: CHECK-INTERESTINGNESS: expected string not found in input # | ; CHECK-INTERESTINGNESS: call void @llvm.dbg.value(metadata i32 %added, # | ^ # | C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-5e7b20.ll:1:1: note: scanning from here # | # | ^ # | C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-5e7b20.ll:4:7: note: possible intended match here # | tail call void @llvm.dbg.value(metadata i32 0, metadata !2, metadata !DIExpression()), !dbg !8 # | ^ # | # | Input file: C:\src\temp\lit-tmp-klc2j6rl\llvm-reduce-5e7b20.ll # | Check file: C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll # | # | -dump-input=help explains the following input dump. # | # | Input was: # | <<<<<< # | 1: # | check:8'0 X error: no match found # | 2: define i32 @main() { # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~ # | 3: entry: # | check:8'0 ~~~~~~~ # | 4: tail call void @llvm.dbg.value(metadata i32 0, metadata !2, metadata !DIExpression()), !dbg !8 # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | check:8'1 ? possible intended match # | 5: ret i32 0 # | check:8'0 ~~~~~~~~~~~ # | 6: } # | check:8'0 ~~ # | 7: # | check:8'0 ~ # | 8: ; Function Attrs: nocallback nofree nosync nounwind speculatable willreturn memory(none) # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 9: declare void @llvm.dbg.value(metadata, metadata, metadata) #0 # | check:8'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | . # | . # | . # | >>>>>> # | **** SUCCESS | Saved new best reduction to C:\src\llvm-project\out\gn\obj\llvm\test\tools\llvm-reduce\Output\remove-dp-values.ll.tmp # | ---------------------------- # | *** Reducing Operands to zero... # | ---------------------------- # | *** Reducing Operands to one... # | ---------------------------- # | *** Reducing Operands to NaN... # | ---------------------------- # | *** Converting operands to function arguments... # | ---------------------------- # | *** Reducing operands by skipping over instructions... # | ---------------------------- # | *** Reducing Operand Bundles... # | ---------------------------- # | *** Reducing Attributes... # | ---------------------------- # | *** Reducing Module Data... # | ---------------------------- # | *** Reducing Opcodes... # | **** SUCCESS | Saved new best reduction to C:\src\llvm-project\out\gn\obj\llvm\test\tools\llvm-reduce\Output\remove-dp-values.ll.tmp # | ---------------------------- # | *** Reducing Volatile Instructions... # | ---------------------------- # | *** Reducing Atomic Ordering... # | ---------------------------- # | *** Reducing Atomic Sync Scopes... # | ---------------------------- # | *** Reducing Instruction Flags... # | ---------------------------- # | Done reducing! Reduced testcase: C:\src\llvm-project\out\gn\obj\llvm\test\tools\llvm-reduce\Output\remove-dp-values.ll.tmp # `----------------------------- # RUN: at line 2 c:\src\llvm-project\out\gn\bin\filecheck.exe --check-prefixes=CHECK-FINAL --input-file=C:\src\llvm-project\out\gn\obj\llvm\test\tools\llvm-reduce\Output\remove-dp-values.ll.tmp C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll --implicit-check-not=dbg.value # executed command: 'c:\src\llvm-project\out\gn\bin\filecheck.exe' --check-prefixes=CHECK-FINAL '--input-file=C:\src\llvm-project\out\gn\obj\llvm\test\tools\llvm-reduce\Output\remove-dp-values.ll.tmp' 'C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll' --implicit-check-not=dbg.value # .---command stderr------------ # | command line:1:22: error: IMPLICIT-CHECK-NOT: excluded string found in input # | -implicit-check-not='dbg.value' # | ^ # | C:\src\llvm-project\out\gn\obj\llvm\test\tools\llvm-reduce\Output\remove-dp-values.ll.tmp:5:23: note: found here # | tail call void @llvm.dbg.value(metadata i32 %added, metadata !2, metadata !DIExpression()), !dbg !8 # | ^~~~~~~~~ # | # | Input file: C:\src\llvm-project\out\gn\obj\llvm\test\tools\llvm-reduce\Output\remove-dp-values.ll.tmp # | Check file: C:\src\llvm-project\llvm\test\tools\llvm-reduce\remove-dp-values.ll # | # | -dump-input=help explains the following input dump. # | # | Input was: # | <<<<<< # | 1: # | 2: define i32 @main() { # | 3: entry: # | 4: %added = add i32 0, 0 # | 5: tail call void @llvm.dbg.value(metadata i32 %added, metadata !2, metadata !DIExpression()), !dbg !8 # | not:imp1 !~~~~~~~~ error: no match expected # | 6: ret i32 0 # | 7: } # | 8: # | 9: ; Function Attrs: nocallback nofree nosync nounwind speculatable willreturn memory(none) # | 10: declare void @llvm.dbg.value(metadata, metadata, metadata) #0 # | . # | . # | . # | >>>>>> # `----------------------------- # error: command failed with exit status: 1 -- ******************** Testing: 0.. 10.. 20.. 30.. 40.. FAIL: LLVM :: Instrumentation/HWAddressSanitizer/alloca.ll (7793 of 52985) ******************** TEST 'LLVM :: Instrumentation/HWAddressSanitizer/alloca.ll' FAILED ******************** Exit Code: 1 Command Output (stdout): -- # RUN: at line 5 c:\src\llvm-project\out\gn\bin\opt.exe < C:\src\llvm-project\llvm\test\Instrumentation\HWAddressSanitizer\alloca.ll -passes=hwasan -hwasan-with-ifunc=1 -S | c:\src\llvm-project\out\gn\bin\filecheck.exe C:\src\llvm-project\llvm\test\Instrumentation\HWAddressSanitizer\alloca.ll --check-prefixes=DYNAMIC-SHADOW # executed command: 'c:\src\llvm-project\out\gn\bin\opt.exe' -passes=hwasan -hwasan-with-ifunc=1 -S # executed command: 'c:\src\llvm-project\out\gn\bin\filecheck.exe' 'C:\src\llvm-project\llvm\test\Instrumentation\HWAddressSanitizer\alloca.ll' --check-prefixes=DYNAMIC-SHADOW # .---command stderr------------ # | C:\src\llvm-project\llvm\test\Instrumentation\HWAddressSanitizer\alloca.ll:137:19: error: DYNAMIC-SHADOW: expected string not found in input # | ; DYNAMIC-SHADOW: attributes #[[ATTR2:[0-9]+]] = { nounwind } # | ^ # | :128:91: note: scanning from here # | attributes #4 = { nocallback nofree nosync nounwind speculatable willreturn memory(none) } # | ^ # | :143:1: note: possible intended match here # | !9 = !{null} # | ^ # | # | Input file: # | Check file: C:\src\llvm-project\llvm\test\Instrumentation\HWAddressSanitizer\alloca.ll # | # | -dump-input=help explains the following input dump. # | # | Input was: # | <<<<<< # | . # | . # | . # | 123: # | 124: attributes #0 = { sanitize_hwaddress } # | 125: attributes #1 = { nounwind } # | 126: attributes #2 = { nocallback nofree nosync nounwind willreturn memory(none) } # | 127: attributes #3 = { nocallback nofree nounwind willreturn memory(argmem: write) } # | 128: attributes #4 = { nocallback nofree nosync nounwind speculatable willreturn memory(none) } # | check:137'0 X error: no match found # | 129: # | check:137'0 ~ # | 130: !llvm.dbg.cu = !{!1} # | check:137'0 ~~~~~~~~~~~~~~~~~~~~~ # | 131: !llvm.module.flags = !{!4, !5} # | check:137'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 132: !llvm.ident = !{!6} # | check:137'0 ~~~~~~~~~~~~~~~~~~~~ # | 133: # | check:137'0 ~ # | . # | . # | . # | 138: !4 = !{i32 7, !"Dwarf Version", i32 4} # | check:137'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 139: !5 = !{i32 2, !"Debug Info Version", i32 3} # | check:137'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 140: !6 = !{!"clang version 13.0.0"} # | check:137'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 141: !7 = distinct !DISubprogram(name: "test_alloca", linkageName: "_Z11test_allocav", scope: !2, file: !2, line: 4, type: !8, scopeLine: 4, flags: DIFlagPrototyped, spFlags: DISPFlagDefinition, unit: !1, retainedNodes: !3) # | check:137'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 142: !8 = !DISubroutineType(types: !9) # | check:137'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 143: !9 = !{null} # | check:137'0 ~~~~~~~~~~~~~ # | check:137'1 ? possible intended match # | 144: !10 = !DILocalVariable(name: "x", scope: !7, file: !2, line: 5, type: !11) # | check:137'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 145: !11 = !DIBasicType(name: "int", size: 32, encoding: DW_ATE_signed) # | check:137'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 146: !12 = !DILocation(line: 0, scope: !7) # | check:137'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 147: !13 = !DILocation(line: 7, column: 5, scope: !7) # | check:137'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 148: !14 = !DILocation(line: 8, column: 1, scope: !7) # | check:137'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | >>>>>> # `----------------------------- # error: command failed with exit status: 1 -- ******************** Testing: 0.. 10.. 20.. 30.. 40.. 50.. FAIL: LLVM :: Instrumentation/HWAddressSanitizer/RISCV/alloca.ll (11716 of 52985) ******************** TEST 'LLVM :: Instrumentation/HWAddressSanitizer/RISCV/alloca.ll' FAILED ******************** Exit Code: 1 Command Output (stdout): -- # RUN: at line 5 c:\src\llvm-project\out\gn\bin\opt.exe < C:\src\llvm-project\llvm\test\Instrumentation\HWAddressSanitizer\RISCV\alloca.ll -passes=hwasan -hwasan-with-ifunc=1 -S | c:\src\llvm-project\out\gn\bin\filecheck.exe C:\src\llvm-project\llvm\test\Instrumentation\HWAddressSanitizer\RISCV\alloca.ll --check-prefixes=DYNAMIC-SHADOW # executed command: 'c:\src\llvm-project\out\gn\bin\opt.exe' -passes=hwasan -hwasan-with-ifunc=1 -S # executed command: 'c:\src\llvm-project\out\gn\bin\filecheck.exe' 'C:\src\llvm-project\llvm\test\Instrumentation\HWAddressSanitizer\RISCV\alloca.ll' --check-prefixes=DYNAMIC-SHADOW # .---command stderr------------ # | C:\src\llvm-project\llvm\test\Instrumentation\HWAddressSanitizer\RISCV\alloca.ll:136:19: error: DYNAMIC-SHADOW: expected string not found in input # | ; DYNAMIC-SHADOW: attributes #[[ATTR2:[0-9]+]] = { nounwind } # | ^ # | :129:91: note: scanning from here # | attributes #4 = { nocallback nofree nosync nounwind speculatable willreturn memory(none) } # | ^ # | :144:1: note: possible intended match here # | !9 = !{null} # | ^ # | # | Input file: # | Check file: C:\src\llvm-project\llvm\test\Instrumentation\HWAddressSanitizer\RISCV\alloca.ll # | # | -dump-input=help explains the following input dump. # | # | Input was: # | <<<<<< # | . # | . # | . # | 124: # | 125: attributes #0 = { sanitize_hwaddress } # | 126: attributes #1 = { nounwind } # | 127: attributes #2 = { nocallback nofree nosync nounwind willreturn memory(none) } # | 128: attributes #3 = { nocallback nofree nounwind willreturn memory(argmem: write) } # | 129: attributes #4 = { nocallback nofree nosync nounwind speculatable willreturn memory(none) } # | check:136'0 X error: no match found # | 130: # | check:136'0 ~ # | 131: !llvm.dbg.cu = !{!1} # | check:136'0 ~~~~~~~~~~~~~~~~~~~~~ # | 132: !llvm.module.flags = !{!4, !5} # | check:136'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 133: !llvm.ident = !{!6} # | check:136'0 ~~~~~~~~~~~~~~~~~~~~ # | 134: # | check:136'0 ~ # | . # | . # | . # | 139: !4 = !{i32 7, !"Dwarf Version", i32 4} # | check:136'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 140: !5 = !{i32 2, !"Debug Info Version", i32 3} # | check:136'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 141: !6 = !{!"clang version 13.0.0"} # | check:136'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 142: !7 = distinct !DISubprogram(name: "test_alloca", linkageName: "_Z11test_allocav", scope: !2, file: !2, line: 4, type: !8, scopeLine: 4, flags: DIFlagPrototyped, spFlags: DISPFlagDefinition, unit: !1, retainedNodes: !3) # | check:136'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 143: !8 = !DISubroutineType(types: !9) # | check:136'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 144: !9 = !{null} # | check:136'0 ~~~~~~~~~~~~~ # | check:136'1 ? possible intended match # | 145: !10 = !DILocalVariable(name: "x", scope: !7, file: !2, line: 5, type: !11) # | check:136'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 146: !11 = !DIBasicType(name: "int", size: 32, encoding: DW_ATE_signed) # | check:136'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 147: !12 = !DILocation(line: 0, scope: !7) # | check:136'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 148: !13 = !DILocation(line: 7, column: 5, scope: !7) # | check:136'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | 149: !14 = !DILocation(line: 8, column: 1, scope: !7) # | check:136'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # | >>>>>> # `----------------------------- # error: command failed with exit status: 1 -- ******************** Testing: 0.. 10.. 20.. 30.. 40.. 50.. 60.. 70.. 80.. 90.. ******************** Failed Tests (3): LLVM :: Instrumentation/HWAddressSanitizer/RISCV/alloca.ll LLVM :: Instrumentation/HWAddressSanitizer/alloca.ll LLVM :: tools/llvm-reduce/remove-dp-values.ll Testing Time: 491.64s Total Discovered Tests: 58598 Skipped : 24 (0.04%) Unsupported : 1806 (3.08%) Passed : 56586 (96.57%) Expectedly Failed: 179 (0.31%) Failed : 3 (0.01%) FAILED: gen/llvm/test/run-lit python3 bin/llvm-lit.py -sv ../../llvm/test ninja: build stopped: subcommand failed. Command '['ninja', '-C', 'out/gn', 'check-llvm']' returned non-zero exit status 1.